How to Fix ‘Mac Boot­ing With Black Screen’ Issue – Guide

If you’re having trouble waking your Mac from sleep, it may be because of a power issue. Here are some tips to try and fix the issue: -Try turning off your computer and restarting it. -Try pressing and holding the power button for about 10 seconds to turn off your computer completely. -Try unplugging all cords from your computer and plugging them back in again. -Try using a different type of charger or battery for your computer than what is currently being used.

  1. A virus has infected your Mac and is causing it to go black.
  2. Your battery is low and is not holding up well anymore.
  3. You are using an old or unsupported software application that is causing problems with your Mac’s performance.

A recent trend in mobile technology is the addition of third-party apps that allow users to expand their screens by adding more space on either side. This can be a great way to keep track of important information or watch a movie while on the go. However, there are some potential risks associated with this type of technology, including data theft and privacy concerns.

The operating system that was recently updated was the Microsoft Windows 10.

Some users have reported that their displays are displaying incorrectly and that the power settings are not working as they should. This could be a sign that your device is experiencing corruption. If you experience any of these issues, please try restoring your device to its factory settings. ..

Fix black MacBook Pro startup screen

MacBook Pro startup black screen problem: Fixing simple solutions to complex technical problems can help fix the issue. If you’re having trouble starting your MacBook Pro, here are some tips to help you get started.

  1. Remove the battery and reformat the computer.
  2. Remove any software that is installed on the computer, including Adobe Photoshop and Illustrator.
  3. Reset the computer to its factory settings.
  4. Install a new battery and reformat the computer again.

Solution #1: Make sure the power is turned on

Are you sure your Mac is plugged in and has a charged battery? If not, make sure the charger cable is intact and your Mac is plugged into an outlet. The green light on your Mac should be on if it’s charging. ..

If you’re experiencing any noise from your Mac, it’s important to rule out whether the issue is with the hard drive or the fans. If the noise is coming from the hard drive, you may need to replace it. If the noise is coming from the fans, you may need to adjust them. ..

If your Mac was turned off due to power, try charging it for at least ten minutes before trying to turn it on again.

If you still see the black screen on your Mac, it may be time to check for a virus.

Solution 2: Disconnect all peripherals

If you are experiencing a black screen issue with your Mac, disconnect all other accessories, including the power cord and any external drives. Only connect the charging cable and adapter to your Mac. If you have another Apple-branded product like an iPhone or iPad, try connecting them to your Mac using the same cable and adapter. If that doesn’t work, try connecting them to a different port on your Mac. ..

Remove all devices that are not connected to the Mac. Connect only the devices that are needed to use the Mac.

Some peripherals can launch their own dialogs that can interfere with your Mac’s display settings. ..

If that doesn’t solve the problem, I’m going to have to call a doctor.

Solution #3: Adjust the screen brightness

It is possible that you accidentally pressed the keyboard brightness keys to make the screen go dark. If this is the case, you may want to try pressing the power button to turn off your computer.

To turn on your Mac’s black screen, use the F1 and F2 buttons.

Solution #4: Force your MacBook Pro to restart

To force the Mac to restart, you can hold down the Option key and click on the System Preferences icon in the Finder.

If you have the Mac startup black screen issue, hard reset may be a solution.

Forcing a Mac to restart can fix bugs and errors. If you’re experiencing problems with your computer, it may be worth trying to force it to restart. This can help fix any issues that may have been caused by the computer’s software or hardware.

Solution #5: Reset your Mac’s NVRAM settings

NVRAM is a type of memory that doesn’t require power to function. This makes it perfect for devices that need to be able to keep track of data even when the power is off.

This feature stores settings in memory for devices that are used to interact with the computer, such as hard drives, speakers, screen display, main boot disk, etc.

If you have a problem with your NVRAM, resetting it can help you get everything back to the way it was when the system was new. ..

To reset Mac NVRAM settings, follow these steps:

  1. Open the “System Preferences” application on your Mac.
  2. Click on the “Security & Privacy” icon.
  3. Click on the “NVRAM” tab.
  4. Select the “Reset NVRAM” button. ..

Solution #6: Reboot the system management controller

If you experience problems with your Mac, resetting the SMC may help. This process discards and resets all settings related to power management, which can solve issues like heat, sleep issues, fans and black screen displays. ..

  1. Remove the battery from the MacBook Pro or MacBook Air.
  2. Place the laptop on its back with the battery removed.
  3. Hold down the power button and use your fingers to twist the power cord around a few times to remove it from the computer.
  4. Lift up and remove the top cover of the computer.
  5. Disconnect all cables from the computer (except for one that goes to your outlet).
  6. Place the laptop on its side with its screen facing down and its keyboard facing out (it should be upside down).
  7. Push down on one of its corners until it pops out from behind it, then lift up and remove it (leave both corner posts in place).

Apple is hoping that when the Mac starts up, the black screen that has been present since last week will be gone and users will be back to their normal routines. ..

Solution # 7: key sequence (keyboard)

If your Mac starts up, the black screen may disappear and your MacBook Pro or MacBook Air may return to normal; however, if it doesn’t boot, try a keystroke sequence to eliminate the black screen.

If your Mac is turning on but the screen is still black, press and hold the Option key and then press the F5 key.

This process is unusual, but it has worked for many.

Solution #8: Reset PRAM

If the MacBook Pro’s reset screen persists, a PRAM reset may be the solution. ..

Mac PRAM is a memory that contains some settings for your Mac.

If you shut down or restart your Mac, the settings in PRAM continue even if they get corrupted. This can cause problems like a black screen on Mac.

  1. Turn off your computer and wait 10 seconds.
  2. Restart your computer and hold down the F8 key as your computer starts up.
  3. Select the Advanced Options menu and select the PRAM option.
  4. Enter the correct password and press Enter to reset the PRAM. ..

Solution #9: Boot into Safe Mode

If you’re experiencing a black screen on your Mac, there is a simple solution. Boot into safe mode and run diagnostics on the disk to fix the problem. ..

  1. Reboot your computer in safe mode.
  2. Type “reboot” into the command prompt and hit enter.
  3. Your computer will reboot in safe mode and you will be able to access your files and programs again.

After you finish starting up, restart again to get out of safe mode and start normally. If the Mac black screen issue is still present, try a different power supply or adapter. ..

Solution #10: Enter the password and press Return

If you’re having trouble getting your Mac to start up, try this alternative startup method. It’s worked for many people. ..

To boot your Mac from a USB drive, enter your login password and press the Enter / Return key. If the Mac is already booted, you will be prompted to choose which device to boot from. Choose the USB drive and press the Enter / Return key again. ..

Solution #11: Turn off automatic graphics switching

This solution only works for MacBook Pro with two GPUs. If you have a third GPU, you will not be able to use it.

Some MacBook Pro models have dual graphics cards that switch automatically. Sometimes, these models can boot directly to a black screen. ..

To solve this problem, you can disable automatic graphics card switching on your MacBook Pro.

Solution #12: Reinstall macOS

This is the only way.

If all of these solutions don’t work, there may be a bigger problem than just simple hardware and software solutions. Reinstalling macOS can solve the problem once and for all. ..

You can choose to install the same MacOS product or purchase a new MacOS and install it on your Mac. ..

Final note

If you have a Mac that starts up with a black screen and no sign of life, it may be because the computer is having trouble starting up. In this guide, we’ll show you how to fix the problem. If you’re not sure how to fix it yourself, our tech support team can help you out.