- Reset your computer to its factory defaults.
- Check your computer’s BIOS and make sure that the Boot Configuration Data (BCD) is properly stored and updated.
- Use a system restore point to revert to the original settings on your computer.
- Try using a different device or network connection to start the PC again.
Ways to Fix Your PC Did Not Start Correctly Error
Run Startup repair tool
If you are experiencing problems with your computer, be sure to select the advanced options when prompted. This will allow you to troubleshoot any issues and get your computer running as smoothly as possible. ..
Startup Repair is a tool that can help you fix problems with your startup.
Tool will analyze and repair any problems that may have prevented your PC from loading properly. This process may take some time.
Try Safe mode
If you have to access your computer, you can try starting it in Safe Mode. However, your computer will only start up with the bare minimum.
If you have a problem with your PC, you can try to fix it by pressing the physical power button on your computer for a few seconds until your PC reboots. Then, interrupt the boot process three times in a row and you will be greeted by the boot repair screen on the fourth occasion. Then select the advanced options.
Troubleshooting your computer can help you fix problems and improve your experience.
The “Advanced Options” tab allows you to customize your Firefox experience. You can change how Firefox looks, works and interacts with the web. ..
On the Startup Settings screen, under Advanced Options, click Restart. Your computer will restart and you will be taken to the Advanced Options screen. On this screen, under Startup Settings, click Restart. ..
In the Startup Settings menu, you can change how your computer starts up.
Safe Mode is a Windows feature that helps to protect your computer from potential damage. If you are not using Windows, Safe Mode can be accessed by pressing 4 or F4 on your keyboard.
If your PC still won’t start, you may need to take your PC to a service center. ..
Run DISM, and SFC scans
In the command prompt, type “cmd” and press enter.
netstat -an This command shows the active network connections and their status.
SFC /scannow This will start the SFC scan and repair the current configuration.
Shutdown/r will restart your PC.
Repair the Boot Configuration Data
To fix the Windows Boot Configuration Data, adhere to the methods listed below.
On the error screen, select Advanced options and then click on Command Prompt.
type -p This will print the current working directory.
Type Y and press Enter to add them to the boot list. If the above command fails to find any Windows installation files, run the following commands one by one and hit Enter after each one.
- Type “cmd” and hit Enter.
- Type “netstat -a” and hit Enter.
- Type “ls -l” and hit Enter.
- Type “md5sum” and hit Enter.
- Type “netstat -a | grep bootp” and hit enter again.
After that, type the command.
Shutdown /r
Final Words
If your computer fails to start up the first time you try, don’t be alarmed. This is not an indication of serious trouble and can usually be fixed with a few simple steps. If the problem persists, however, it may be indicative of a more serious issue. When Windows fails to start on your computer, it will display a message like “Your PC did not start successfully.” This message means there is an issue with one or more startup configurations and files. There are many possible causes for this problem, including a faulty driver or software, power loss, virus infection, or file system damage. By following these simple steps you can often fix the issue and prevent it from happening again. ..
